SHOCK ABSORBER REPAIR IN MADRID

Which shock absorber repair shop should I choose in Madrid?

At Central 4x4, we are professionals in the sale of high-quality shock absorbers and a specialized workshop for shock absorber repair in Madrid. We are delighted to be able to advise you with the sole objective of helping you find the perfect shock absorbers so you can enjoy your vehicle even more and do so more safely.

As you likely know if you read our blog frequently, there are signs that will help you know when your shock absorbers are starting to fail and therefore, it's time to change them. choose shock absorbers new for your vehicle.

However, on occasion, considering the rShock absorber repair It is a good alternative to avoid having to replace the shocks completely with new ones.

It's crucial to keep in mind that shock absorber repair isn't valid in all cases. Remember that shock absorbers are a key part of your vehicle's safety system. Therefore, it's extremely important to get advice from a professional team that won't compromise your safety or the safety of those traveling with you or around you.

That being said, below we will explain the basic procedure for repairing shock absorbers.

THE BEST STORE IN MADRID FOR SHOCK ABSORBER REPAIR

STEP-BY-STEP GUIDE TO REPAIRING THE SHOCK ABSORBER

For effective repair, distinguish the shock absorber.

Initially, it is fundamental determine the nature of the shock absorbers installed in your vehicle. Check if it is hydraulic shock absorbers, since if they are gaseous, they will not be repairable and your only viable option will be replacement. This criterion is crucial for the correct execution of maintenance tasks.

2. WHEN REPAIRING THE SHOCK ABSORBER, SAFETY FIRST

Once you have definitively established the type of shock absorbers fitted to your car, it is imperative that Take adequate precautions to ensure your personal safety. This involves the use of protective eyewear and sturdy gloves. Once you've taken these precautions, you can begin the process of restoring the cushioning components.

3. SHOCK ABSORBER HOLE

Subsequently, proceed to a thorough analysis of all the elements that make up the shock absorber. To access the chamber that houses the oil, it will be necessary to carefully drill the housing Using a 1/32 inch drill bit, located approximately 4 centimeters from the base of the shock absorber. Ensure the plunger is in the upper position during this process.

4. Filling the Chamber with Oil

Once you have made the required perforations, proceed to fill with oil, approximately one liter per shock absorber unit.

The shock absorber piston advances until its lowest position and immerse it in the container, ensuring the hole is completely submerged in the oil. Then, raise the plunger to its top position. During this procedure, the hole will act as a suction pump, effectively drawing out the oil.

5. COVER THE HOLE

Use a stopper to block the hole and prevent oil from escaping, then gradually lower the plunger.

6. SOLDER THE OPENING

Finally, carry out the hole welding process. It is essential to perform this task at a low amperage to avoid damaging the shock absorber housing. Additionally, exercise extreme caution to prevent the risk of igniting the oil during the welding process.

What tools do I need to repair my shock absorber?

Hydraulic jack and jack stands To safely lift and support the vehicle while working on the shock absorbers.
Wheel wrench To remove the wheels and access the shock absorbers.
Socket and Ratchet Wrench Set Essential for loosening and tightening the bolts and nuts that secure the shock absorber to the vehicle.
Torque wrench To ensure that bolts and nuts are tightened to the torque specified by the manufacturer, guaranteeing a secure fastening without damaging the parts.
Spring compressor In case you need to disassemble the spring and shock absorber assembly, this tool is crucial for safely compressing the spring.
Safety glasses and resistant glovesTo protect yourself from potential oil, metal, or dirt projections during the process.
Drills and drill bits (if the repair process requires it, as in the case of shock absorbers that can be refilled with oil).
Container for oil and shock absorber oil (if you are going to refill hydraulic shock absorbers).
Welding equipment (if you need to seal any opening made during the repair process).